Adjust / tuning carburetor PHBL 24 AD

Cartella in cui parlare di tutto quello che non riguarda sezioni specifiche. Qui è veramente tutto libero, entro i limiti!
Rispondi
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

hi,
i'm trying to start my motor with dellorto phbl 24 AD with no success.
i already run it, but i had one air leak from seal ( stator plate side ). change it and now doesn't run.
at that time, i adjust air and idle screw and was running.

already try with and without air filter. put some petrol in cylinder ( spark ) and nothing.
spark is working, have petrol, etc....

can anyone help me with with settings to this carb???

thanks again,
nuno
pat_96
Membro 80cc
Messaggi: 1865
Iscritto il: lun mar 07, 2011 7:27 pm
Ha ringraziato: 6 volte
Sei stato  ringraziato: 16 volte

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da pat_96 »

describe the whole configuration of your carb ;)
58x47 in fase di sviluppo :D

"Io so di non essere il migliore, ma non so quanti altri siano migliori di me[."/i]
Cit. Enzo Ferrari
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

pat_96 ha scritto:describe the whole configuration of your carb ;)
what you need to know?
pat_96
Membro 80cc
Messaggi: 1865
Iscritto il: lun mar 07, 2011 7:27 pm
Ha ringraziato: 6 volte
Sei stato  ringraziato: 16 volte

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da pat_96 »

all the values of the small parts of the carb ;)
58x47 in fase di sviluppo :D

"Io so di non essere il migliore, ma non so quanti altri siano migliori di me[."/i]
Cit. Enzo Ferrari
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

pat_96 ha scritto:all the values of the small parts of the carb ;)
main jet 100
idle jet 50
starter jet 60

needle and float couldn't see. feed jet or " polviz. " 200

is this info you need?
pat_96
Membro 80cc
Messaggi: 1865
Iscritto il: lun mar 07, 2011 7:27 pm
Ha ringraziato: 6 volte
Sei stato  ringraziato: 16 volte

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da pat_96 »

what filter do you have? i think that the main jet could be a bit bigger than usual on cone filters
58x47 in fase di sviluppo :D

"Io so di non essere il migliore, ma non so quanti altri siano migliori di me[."/i]
Cit. Enzo Ferrari
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

pat_96 ha scritto:what filter do you have? i think that the main jet could be a bit bigger than usual on cone filters
malossi E5

Also, it seems is not burning all fuel. Is dropping from the exhaust!! :doubt:
pat_96
Membro 80cc
Messaggi: 1865
Iscritto il: lun mar 07, 2011 7:27 pm
Ha ringraziato: 6 volte
Sei stato  ringraziato: 16 volte

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da pat_96 »

for malossi e5, you need MAX YET 88 ;)
58x47 in fase di sviluppo :D

"Io so di non essere il migliore, ma non so quanti altri siano migliori di me[."/i]
Cit. Enzo Ferrari
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

pat_96 ha scritto:for malossi e5, you need MAX YET 88 ;)
can it be 90?? that's the lowest i have :lol:
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

no luck :evil:

ask to other guy for jets, tried low as 72 and nothing. can't keep it working, with and without filter...
try all kind of configuration adjusting air and idle, 1/2 turn steps... no can do :cry:

one friend that races here in Portugal, told me i think that 24mm is too much! maybe 21mm or 19mm is enough!!!

any ideas??
pat_96
Membro 80cc
Messaggi: 1865
Iscritto il: lun mar 07, 2011 7:27 pm
Ha ringraziato: 6 volte
Sei stato  ringraziato: 16 volte

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da pat_96 »

i have 24 carb and my engine is the same as yours ;) yust set it as well
58x47 in fase di sviluppo :D

"Io so di non essere il migliore, ma non so quanti altri siano migliori di me[."/i]
Cit. Enzo Ferrari
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

pat_96 ha scritto:i have 24 carb and my engine is the same as yours ;) yust set it as well
that's what i don't understand, why my is not working well .... i don't want to spend more maney on new carb....

tell me your set up please: exhaust, filter, jets, manifold length and if possible number of turns of air idle screw ( this value only so i have point to start )

Can the exhaust make diference??? i have polini racing "" banana ""

I'll try more during this weekend, if not able.... i'll give up :(


thank you once again pat, for your great patient and help :wink:
pat_96
Membro 80cc
Messaggi: 1865
Iscritto il: lun mar 07, 2011 7:27 pm
Ha ringraziato: 6 volte
Sei stato  ringraziato: 16 volte

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da pat_96 »

cylinder 115 polini 57.9 (not original heheh :D )
crankshaft DRT c45
carb 24 dell'orto AD 87 max jet and the others are original jets
filter malossi cone e5
exaust giannelli banana / proma banana




i think you have to clean that carb ;) some pipelines may be closed ;)
58x47 in fase di sviluppo :D

"Io so di non essere il migliore, ma non so quanti altri siano migliori di me[."/i]
Cit. Enzo Ferrari
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

pat_96 ha scritto:cylinder 115 polini 57.9 (not original heheh :D )
crankshaft DRT c45
carb 24 dell'orto AD 87 max jet and the others are original jets
filter malossi cone e5
exaust giannelli banana / proma banana

i think you have to clean that carb ;) some pipelines may be closed ;)

i did clean, dismantled piece by piece
that exhaust is similar to the one i have, correct??


what about the first start?? you saw my video, it's start but run it, puff.... :evil:
how many turns at AIR screw ( the one with NO spring ) did you open ( turn left ) ??
pat_96
Membro 80cc
Messaggi: 1865
Iscritto il: lun mar 07, 2011 7:27 pm
Ha ringraziato: 6 volte
Sei stato  ringraziato: 16 volte

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da pat_96 »

yust 1,5 turns i think ;) from totally closed ;)
58x47 in fase di sviluppo :D

"Io so di non essere il migliore, ma non so quanti altri siano migliori di me[."/i]
Cit. Enzo Ferrari
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

pat_96 ha scritto:yust 1,5 turns i think ;) from totally closed ;)
i start with 2 turns, from totally closed.
I'll try few more times :wink:
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

no can do :evil:

with stock carb, manifold and filter with 90 jet works well!!!

don't understand what i did or do wrong...... :cry:
pat_96
Membro 80cc
Messaggi: 1865
Iscritto il: lun mar 07, 2011 7:27 pm
Ha ringraziato: 6 volte
Sei stato  ringraziato: 16 volte

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da pat_96 »

maybe it's the 24phbl that has something wrong... i think it's possibile
58x47 in fase di sviluppo :D

"Io so di non essere il migliore, ma non so quanti altri siano migliori di me[."/i]
Cit. Enzo Ferrari
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

pat_96 ha scritto:maybe it's the 24phbl that has something wrong... i think it's possibile
i decided to give to phbl few more tries.
order few jets, including 87.

one more question pat, did you change needle position?
can you confirm in witch level yours is set??

thanks,
nuno
pat_96
Membro 80cc
Messaggi: 1865
Iscritto il: lun mar 07, 2011 7:27 pm
Ha ringraziato: 6 volte
Sei stato  ringraziato: 16 volte

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da pat_96 »

i suggest it's the second posizion from the top
58x47 in fase di sviluppo :D

"Io so di non essere il migliore, ma non so quanti altri siano migliori di me[."/i]
Cit. Enzo Ferrari
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

pat_96 ha scritto:i suggest it's the second posizion from the top
so in the middle, correct?
pat_96
Membro 80cc
Messaggi: 1865
Iscritto il: lun mar 07, 2011 7:27 pm
Ha ringraziato: 6 volte
Sei stato  ringraziato: 16 volte

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da pat_96 »

yes
;)
58x47 in fase di sviluppo :D

"Io so di non essere il migliore, ma non so quanti altri siano migliori di me[."/i]
Cit. Enzo Ferrari
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

pat_96 ha scritto:yes
;)
ok.
already have 19 and 20 carb, just in case..... :evil:
cabacita
Membro triciclo
Messaggi: 94
Iscritto il: mer gen 04, 2012 6:27 pm
Ha ringraziato: 1 volta
Sei stato  ringraziato: 0

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da cabacita »

pat_96 ha scritto:i suggest it's the second posizion from the top
ok.

it seems, that at my last carb cleaning / dismantle, i forgot to remove fuel banjo.... :roll:
this evening, i was cleaning few parts for assemble and decided to clean phbl 24 again. but this time, i took the banjo out.

this is what i found:

Immagine



is that dirt or some kind of composite filter material????? :shock: :shock: :shock: :shock:

if it's dirt, don't know what to say... maybe the problem of tuning for full throttle is here?!?? fuel doesn't get to the float chamber with enougt speed or quantity to operate because of that, blocking the way!!!!!!

the carb never run outside, only at my garage with engine at my working bench.... bought it brand new......

can the same guy lol or someone else confirm this to me???
i have 2 more carbs here, and non of them has that " dirt or sand or whatever that is " in it!!!!

thanks again
Ultima modifica di cabacita il mar mag 29, 2012 2:53 am, modificato 1 volta in totale.
pat_96
Membro 80cc
Messaggi: 1865
Iscritto il: lun mar 07, 2011 7:27 pm
Ha ringraziato: 6 volte
Sei stato  ringraziato: 16 volte

Re: Adjust / tuning carburetor PHBL 24 AD

Messaggio da leggere da pat_96 »

it's dirt ! oh my god!
58x47 in fase di sviluppo :D

"Io so di non essere il migliore, ma non so quanti altri siano migliori di me[."/i]
Cit. Enzo Ferrari
Rispondi

Chi c’è in linea

Visitano il forum: Google Adsense [Bot] e 21 ospiti